研究成果

科研项目
1. 国家863计划项目“三维机织物为基础的微带天线系统结构设计和性能研究,”项目负责人, 2007年12月-2010年11月。

2. 国防科工委基础科研项目,项目负责人,(秘密级)2006年1月-2007年12月。

3. 上海市浦江人才计划项目“低成本超厚三维正交复合材料的织造和成型工艺研究”,项目负责人, 2005年1月-2007年12月。

4. 国防科工委基础科研项目,项目参与人,(秘密级)2006年1月-2008年12月。

5. 教育部长江学者创新团队子项目“常压等离子体表面处理技术”,课题负责人, 2006年1月-2007年12月。

6. 十二五国家科技支撑计划子项目“基于三维机织物和三维机织复合材料的装备研究” 项目参与人,2013年1月-2014年12月

7. 国家自然科学基金重点项目“复合材料三维织造成形制造技术及设备基础研究”子项目,项目参与人,2012年1月-2014年12月


代表论文
近5年发表论文

1. Liang, Y., Cheng, S., Zhao, J., Zhang, C., Sun, S., Zhou, N., Qiu, Y., Zhang, X., Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries, Journal of Power Sources, 240:204-211(2013)

2. Zhao, F., Jiang, Q., Chen, H., Xue, G. and Qiu, Y. Three dimensional woven fabrics as filter media in membrane bioreactor for wastewater treatment, Journal of Materials Science, 48:7869–7874 (2013)

3. Liu, W., Zhao, H., Yong, Z., Xu, G., Wang, X., Xu, F., Hui, D., Qiu, Y. Improving Mechanical and Electrical Properties of Oriented Polymer-free Multi-walled Carbon Nanotube Paper by Spraying while Winding, Composites Part B. Engineering, 53:342–346 (2013)

4. Yao, L., Rong, Q., Shan, Z., Qiu, Y. Static and bending fatigue properties of ultra-thick 3d orthogonal woven composites. Journal of Composite Materials, 47(5): 569–577 (2013)

5. Zhou, N., Yao, L., Liang, Y., Yu, B., Ye, M., Shan, Z., Qiu, Y., Improvement of mechanical properties of ramie/poly (lactic acid) (PLA) laminated composites using a cyclic load pre-treatment method, Industrial Crops and Products, 45:94-99 (2013)

6. Jiang, Q., Li, Y., Xie, J., Sun, Ji., Yao, L., Hui, D., Qiu, Y. Plasma functionalization of bucky paper and its composite with phenylethynyl-terminated polyimide, Composites Part B, 45(1): 1275-1281 (2013)

7. Rhee, K.Y., Park, S.J., Hui, D., Qiu, Y. Effect of oxygen plasma-treated carbon fibers on the tribological behavior of oil-absorbed carbon/epoxy woven composites, Composites Part B. Engineering. 43: 2395–2399 (2012)

8. Zhou, N., Yu, B., Sun, J., Yao, L. Qiu, Y., Influence of chemical treatments on the interfacial properties of ramie fiber reinforced poly (lactic acid) (PLA) composites, Journal of Biobased Materials and Bioenergy, 6: 564-568 (2012)

9. Zhang, R., Pan, X., Jiang, M., Peng, S., Qiu, Y., Influence of atmospheric pressure plasma treatment on surface properties of PBO fiber, Applied Surface Science. 261: 147– 154 (2012)

10. Yao, L., Wang, X., Xu, F., Jiang, M., Zhou, D., and Qiu, Y. Effect of wire space and weaving pattern on performance of microstrip antennas integrated in the three dimensional orthogonal woven composites applied composites materials. Applied Composite Materials. 19 (1): 21-30 (2012).

11. Wang, X., Yao, L., Zhou, D., Qiu, Y. Design and characterization of conformal microstrip antennas integrated into 3d orthogonal woven fabrics. Journal of Engineered Fibers and Fabrics. 7(2): 76-80 (2012)

12. Ji, F., Hong, Y., Yao, L., Peng, S., Qiu, Y. Effect of glycerol coating on the atmospheric pressure plasma treatment of UHMPE fibers. Journal of Adhesion Science and Technology. 26(1-3): 289-301 (2012)

13. Li, Y., Yao, L., Ji, F., Peng, S., Gao, Z., Sun, S., Qiu, Y. Influence of moisture on effectiveness of plasma treatments of polymer surfaces. Journal of Adhesion Science and Technology, 26:1123-1139 (2012)

14. Li, X., and Qiu, Y. The effect of plasma pre-treatment on NaHCO3 desizing of blended sizes on cotton fabrics. Applied Surface Science. 258(11): 4939–4944 (2012)

15. Zhou, Z., Wang, J., Huang, X., Zhang, L., Moyo, S., Sun, S., Qiu, Y. Influence of absorbed moisture on surface hydrophobization of ethanol pretreated and plasma treated ramie fibers. Applied Surface Science. 258:4411–4416(2012)

16. Liu, W., Zhao, H., Inoue, Y., Wang, X., Bradford, P.D., Kim, H., Qiu, Y., Zhu, Y. Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding, Composite Part A : Applied Science and Manufacturing, 43:587-592 (2012)

17. Li, X., Lin, J. and Qiu, Y. Influence of He/O2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics, Applied Surface Science, 258:2332-2338 (2012)

18. Wang, C. Qiu, Y. Study on wettability improvement and its uniformity of wool fabric treated by atmospheric pressure plasma jet, Journal of Applied Polymer Science. 123(2): 1000-1006 (2012)

19. Xu, F., Yao, L. Wang, X. Qiu, Y. Effect of conductive yarn crimp in radiation patch of 3d integrated microstrip antenna on its performance. Composites Part B. Engineering. 43:465-470 (2012)

20. Sun, S. and Qiu, Y. Influence of moisture on wettability and sizing properties of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet, Surface & Coatings Technology, 206:2281-2286 (2011)

21. Tian, L., Nie, H., Chattertonc, N.P., Branford-Whitec, C.J., Qiu, Y., Zhu, L. Helium/oxygen atmospheric pressure plasma jet treatment for hydrophilicity improvement of grey cotton knitted fabric, Applied Surface Science, 257(16): 7113–7118 (2011)

22. Zhao, Y., Zhang, C., Shao, X. Wang, Y. Qiu, Y. The influence of atmospheric plasma treatment on carbon fiber/matrix interfacial adhesion. Journal of Adhesion Science Technology. 25:2897-2908 (2011)

23. Liang, Y., Lin, Z., Qiu Y. Zhang, X. Fabrication and characterization of LATP / PAN composite fiber-based membrane lithium-ion battery separators. Electrochimica Acta. 56:6474-6480 (2011)

24. Gao, Z. Sun, S., Peng, S., Yao, L., Qiu, Y. The surface modification of nylon 6 films treated with he/o2 atmospheric pressure plasma jet, Journal of Applied Polymer Science. 120: 2201–2206 (2011)

25. Xie, J., Xin, D., Cao, H., Wang, C., Zhao, Y., Yao, L., Ji, F., Qiu, Y. Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment, Surface & Coatings Technology. 206: 191-201 (2011)

26. Sun, Ji. Yao, L., Sun, S., Qiu, Y. ESR study of atmospheric pressure plasma jet irradiated Kevlar 49 fibers, Surface & Coatings Technology. 205: 5312–5317 (2011)

27. Liu, W.,Zhang, X., Xu, G., Bradford, P. D., Wang, X., Zhao, H. Zhang, Y., Jia, Q., Yuan, F. G., Li, Q., Qiu, Y., Zhu, Y. Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray. Carbon. 49: 4786-4790 (2011)

28. Xu, F., Yao, L., Zhao, D., Jiang, M., Qiu, Y. The effects of the resin layer in the patch structure to the antenna performance of a three dimensional integrated microstrip antenna, Journal of Composite Materials, 45(15): 1627 - 1635 (2011)

29. Liang, Y., Ji, L., Guo, B., Lin, Z., Yao, Y., Li, Y., Alcoutlabi, M., Qiu, Y., Zhang, X. Preparation and electrochemical characterization of ionic-conducting lithium lanthanum titanate oxide/polyacrylonitrile submicron composite fiber-based lithium-ion battery separators, Journal of Power Sources. 196: 436-441. (2011)

30. Zhou, Z., Liu, X., Hu, B., Wang, J., Xin. D., Sun, J., Yao, L., Qiu, Y. Hydrophobic atmospheric pressure plasma treatment of ramie fibers with ethanol pretreatment. Surface & Coatings Technology. 205: 4205–4210 (2011)

31. Yao, L., Jiang, M., Zhou, D., Xu, F., Zhao, D., Zhang, W., Zhou, N., Jiang, Q., Qiu, Y. Fabrication and characterization of microstrip array antennas integrated in the three dimensional orthogonal woven composite, Composites Part B. 42:885-890 (2011)

32. Sun, J. Yao, L. Sun, S. Gao, Z. Qiu. Y. Effect of storage condition and aging on acrylic acid inverse emulsion surface-grafting polymerization of PET films initiated by atmospheric pressure plasmas. Surface & Coatings Technology. 205: 2799–2805 (2011)

33. Sun, S., Sun, J., Yao, L. Qiu, Y. Wettability and sizing property improvement of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet. Applied Surface Science, 257: 2377–2382 (2011)

34. Du, C., Zhong, S., Yao, L., Qiu, Y., Four element textile array antenna on three dimensional orthogonal woven composites. Microwave and Optical Technology Letters, 52(11): 2487-2488. (2010)

35. Zhang, Y., Wu, H., Qiu, Y., Morphology and properties of hybrid composites based on polypropylene/polylactic acid blend and bamboo fiber. Bioresource Technology, 101(20): 7944-7950. (2010)

36. Wang C. X.; Du M.; Qiu Y. P. Influence of pore size on penetration of surface modification into woven fabric treated with atmospheric pressure plasma jet, Surface & Coatings Technology, 205(3):909-914 (2010)

37. Xu, F., Yao, L., Zhao, D. Zhao, L., Jiang, M. Qiu, Y. Performance and Impact Damage of a Three Dimensionally Integrated Microstrip Feeding Antenna Structure, Composite Structures. 93: 193–197 (2010)

38. Sun, S., Gao, Z. Peng, S., Yao, L., Wang, C., Qiu, Y. Surface modification of PET films by atmospheric pressure plasma induced acrylic acid inverse emulsion graft polymerization, Surface & Coatings Technology. 204: 4101–4106 (2010)

39. Peng, S., Liu, X., Sun, S., Gao, Z., Yao, L., Qiu, Y.Influence of absorbed moisture on desizing of poly(vinyl alcohol) on cotton fabrics during atmospheric pressure plasma jet treatment, Applied Surface Science. 256: 4103–4108 (2010)

40. Wen, Y. Li, R., Cai, F. Fu, K. Peng, S. Jiang, Q. Yao, L. Wang, C. Qiu, Y. Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers, Applied Surface Science. 256: 3253–3258 (2010)

41. Peng, S. Gao, Z. Sun, S., Yao, L., Wang, C., Qiu, Y. Influence of absorbed moisture on solubility of poly(vinyl alcohol) film during atmospheric pressure plasma jet treatment, Surface & Coatings Technology. 204:1222–1228 (2010)

42. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. The influence of moisture on atmospheric pressure plasma etching of PA6 films. Current Applied Physics. 10:230-234 (2010)

43. Zhang, Y., Zhu, H., Huang, J., Zou, J., Wu, H., Qiu, Y.,Effects of oxygen plasma treatment on tensile deformation of nano-SiO(2) sol-gel coating ultra-high molecular weight polyethylene filaments. Acta Physica Sinica, 58(6): S292-S297. (2009)

44. Zhang, Y., Zhu, H., Wu, H., Qiu, Y., Effects of helium plasma treatment on tensile behaviour of nano-SiO(2) sol-gel coating T300 carbon fiber. Acta Physica Sinica, 58(6): S298-S305. (2009)

45. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Surface modification of polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet. Applied Surface Science. 256: 1496–1501(2009)

46. Yao, L. Wang, X. Xu, F. Zhao, D., Jiang, M. Qiu, Y. Fabrication and impact performance of three dimensionally integrated microstrip antennas with microstrip feeding and co-axial feeding, Smart Materials and Structures.18:095034 (2009).

47. Peng, S. Gao, Z. Sun, J. Yao, L. Qiu, Y. Influence of argon/oxygen atmospheric dielectric-barrier discharge treatment on desizing and scouring of poly(vinyl alcohol) on cotton fabrics, Applied Surface Science. 255: 9458–9462 (2009).

48. Xu, H., Peng, S., Wang, C., Yao, L., Sun, J., Ji, F. Qiu, Y. Influence of Absorbed Moisture on Anti-Felting Property of Wool Treated with Atmospheric Pressure Plasma. Journal of Applied Polymer Science. 113(6): 3687-3692 (2009).

49. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Influence of processing parameters on atmospheric pressure plasma etching of polyamide 6 film. Applied Surface Science. 255: 7683–7688 (2009)

50. Yao, L. and Qiu, Y., Microstrip antennas integrated in three dimensional orthogonal woven composites. Composites Science and Technology. 69: 1004–1008 (2009)

51. Jiang, Q. Li, R. Sun, J. Wang, C. Peng, S., Ji, F. Yao, L. Qiu, Y. Influence of Ethanol Pretreatment on Effectiveness of Atmospheric Pressure Plasma Treatment of Polyethylene Fibers. Surface & Coatings Technology. 203: 1604–1608(2009)


专利专著
近三年获得授权发明和实用新型专利

1. 姚 澜;邱夷平,专利名称:构成基于三维正交机织物的共形承载微带天线结构的方法

2. 张 坤;高天琪;陈 余;周 沁;赵 达;蒋牧文;姚 澜;纪 峰;张迎晨;邱夷平,专利名称:一种发动机压气机包容环的织造方法

3. 许福军;邱夷平;姚澜,专利名称:具有正交结构与平纹结构的三维机织物的制备方法

4. 邱夷平;蒋牧文;姚澜;周冬春;赵达;张坤;张文文;吴昊;姜茜;周楠婷,专利名称:基于三维正交机织物的共形承载微带阵列天线的织造方法

5. 许福军;邱夷平;姚澜,专利名称:一种无树脂覆盖的三维机织物共形承载微带天线的模塑成型方法

6. 许福军;邱夷平;姚澜,专利名称:一种无树脂覆盖的三维正交机织复合材料的模塑成型方法

7. 周冬春;赵达;姚澜;张文文;吴昊;蒋牧文;张坤;周楠婷;姜茜;张博文;罗瑞;邱夷平,专利名称:聚四氟乙烯基三维正交复合材料的制备方法

8. 张迎晨;朱海燕;吴红艳;邱夷平,专利名称:蒙脱土/聚丙烯/聚乳酸复合纤维材料及其制备方法

9. 张迎晨;秦 翊;吴红艳;邱夷平,专利名称:纳米氧化锌/聚丙烯/聚乳酸复合纤维材料及其制备方法

10.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理涂覆碳纳米管溶胶玄武岩纤维表面改性方法

11.张迎晨;邹 静;吴红艳;邱夷平,专利名称:碳纳米管/聚丙烯/聚乳酸复合纤维材料及其制备方法

12.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米溶胶的碳纤维表面改性的方法

13.张迎晨;邹 静;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米二氧化硅的碳纤维表面改性的方法

14.张迎晨;朱海燕;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米二氧化硅溶胶的Vectran纤维表面改性的方法

15.张迎晨;吴红艳;邱夷平,专利名称:金属氧化物纳米粉体大气压常温等离子体改性处理方法

16.发明人:张迎晨;黄婧南;邱夷平,专利名称:等离子体纳米二氧化钛/聚丙烯/聚乳酸及其制备方法

17.章倩 邱夷平 房晓萌 陆春红 姚一舟 李凌晨 章悦庭,专利名称:一种三维正交机织麻织物增强聚丙烯复合材料

18.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶超高分子量聚乙烯纤维改性的方法

19.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶Vectran纤维改性的方法

20.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理超高分子量聚乙烯纤维改性的方法

21.张迎晨;秦翊;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶凯夫拉纤维改性的方法

22.章倩,刘万军,钱浩,何源,蒋慧,郁崇文,章悦庭,邱夷平,专利名称:实验室用多功能微型脱胶机


  • 主要经历
  • 教学内容
  • 研究成果
  • 获奖荣誉
  • 更多信息
返回原图
/